Describtion:
LUMATEK Fully Electronic - Switchable - Ballast (VSG)
Lumatek the #1 supplier of electronic ballasts to the hydroponics and horticulture industries. Lumatek products offer exceptional quality in electronic dimmable ballasts.
Electronic ballast for HPS or MH lamps.
- Quick start - lamp is quickly at ideal light color
- suitable for HPS and MH lamps
- more lumen with less current
- microprocessor controlled (lamp voltage is measured and compensated if necessary)
- automatic shutdown if a lamp is defective to prevent a short circuit
- electromagnetic protection against interference from other electronic devices
- No compromise on workmanship, built in high quality aluminum housing with cooling fins for smooth operation.
Variations:
- Electronic ballast for 400W HPS or MH lamp:
- Voltage: 240v
- Current: 3.6A / 1.8A
- Input power : 430W
- Output power : 400W
- Power factor : > 0,99
- Voltage range : 108 to 264 V
- Lamp CCF : < 1.7
- Operating frequency : High frequency
- No audible noise , no flicker
- Env Temp : -25 to 50 ° C ( -13 to 122 ° F)
- Enclosure Temperature Rise: 35 ° C (95 ° F)
- Env IP need : > IP23
- Electronic ballast for 600W HPS or MH lamp:
- Voltage: 120V / 240V 50 / 60Hz
- Current: 5.47A / 2.74A
- Input power : 655W
- Output power : 600W
- Power factor : > 0.99
- Voltage range : 108 to 264V
- Lamp CCF : < 1.7
- Operating frequency : High frequency
- No audible noise , no flicker
- Env Temp : -25 to 50 ° C ( -13 to 122 ° F)
- Enclosure Temperature Rise: 35 ° C (95 ° F)
- Env IP need : > IP23
Increase your output by 10% by switching to 600SL .
- Electronic ballast for 1000W HPS or MH lamp:
- Voltage: 240V 50 / 60Hz
- Current : 4.50A
- Input power : 1055W
- Output power : 1000W
- Power factor : > 0.99
- Voltage range : 180 to 264
- Lamp CCF : < 1.7
- Operating frequency : High frequency
- No audible noise , no flicker
- Env Temp : -25 to 50 ° C ( -13 to 122 ° F)
- Enclosure Temperature Rise: 35 ° C (95 ° F)
- Env IP require : > IP23
Optional selectable dimming levels at 600W , 750W and 1000W levels. Increase your output by 10% by switching to 1000SL.
Note: Connecting cable for connection to the reflector (C14 cable) is already included!
