Description:
The hand watering set consists of five components that can be easily assembled at home to make watering extremely easy, especially for larger plant tents. In combination with a 90L tub or similar containers, nutrient solutions for plants can be easily watered. The length of the hose can be selected in the menu above.
The system consists of:
1.) RP Watering Rod
The 90cm long watering wand is suitable for all conventional watering sets. With the RP Pro Luxe 3 watering wand, even hard-to-reach plant areas in the grow tent can be easily reached. The unscrewable full aluminium head and the brass connection thread make the watering wand a solid tool to simplify the watering in your growroom.
2) RP Submersible Pump 3500L/h
This submersible pump from Remmer is well suited for use in complex irrigation systems. It offers you a pumping capacity of 3,500 litres per hour and a delivery head of 5.50m. This makes it suitable for use in deep water tanks or rain barrels.
- Pumping capacity: 3,500 litres per hour
- Delivery height: 5.5 metres
- For use in irrigation systems
- Multi connection piece: 19mm, 25mm & 1" AG
3) Alfaflex hose 1/2" (12,5mm)
The yellow Alfaflex water hose can be ordered by the metre up to a length of 25 metres. The hose is rubberised and robust, and can be used for example in the garden or the growroom. You can find any connections or associated pumps in the 'Watering Accessories' category.
The diameter is 0.5 inch (12.5mm).
Hose length can be freely selected in the menu above.
4) Hose coupling 2x (for connection to pump and watering wand)
The hose connector from XCellent connects e.g. a pump or general connection to a garden hose (with a diameter of 12.7mm or 1/2"). The connector is simply screwed into the hose and holds mechanically. The connector is watertight and can be easily detached.
5) Male attachment piece for pump (for attaching the hose coupling to the pump).
